Skip to main content

Free online tool

Pool Volume Calculator

Find out exactly how many gallons your pool holds. Choose your pool shape, enter the dimensions, and get an instant result in gallons and liters.

Free tool

Calculate Your Pool Volume

Select your pool shape, pick units, and enter dimensions. Results update as you type.

Pool Shape
Units
Depth
Dimensions

⚠ Enter a number greater than zero.

⚠ Enter a number greater than zero.

⚠ Enter a number greater than zero.

Pool Volume

—

US Gallons

—

Liters

Next step: use this volume for chlorine dosing, pH balance, and pump sizing.

Need help with your pool?

Our team can help with construction, renovation, and maintenance for pools of any size.

Get a Free Quote

How to measure

Measure your pool in four steps

Accurate volume starts with accurate measurements. Use a tape measure along the waterline, and record depth at the deepest water level you normally keep.

  1. Pick the closest shape

    Match your pool to rectangle, round, oval, kidney, L-shape, or freeform. If it is irregular, freeform with average width is usually the best estimate.

  2. Measure length and width

    Length is the longest waterline distance. Width is the widest point perpendicular to length. For kidney pools, measure the narrow end (A) and wide end (B).

  3. Capture depth correctly

    If depth is consistent, enter one depth. If you have a shallow and deep end, enter both—we average them for a realistic volume.

  4. L-shape tip

    Treat an L-shaped pool as two rectangles. Measure Length A × Width A for the main run, then Length B × Width B for the return. The diagram shows which side is which.

  5. Double-check units

    Most U.S. homeowners measure in feet. Switch to meters only if your plans or tape are metric—mixing units will throw the result off.

  6. Use the number for care

    Save the gallon total. You will need it for chlorine, shock, pH, alkalinity, and CYA dosing, plus pump and heater sizing.

Why volume matters

The number behind every good pool decision

Pool volume is not trivia—it is the base figure for chemistry, equipment, and water costs across Miami’s long swim season.

Chemical dosing

Chlorine, acid, and shock amounts scale with gallons. Dosing by guesswork is the fastest way to cloudy water or wasted product.

Pump & turnover

A correctly sized pump should turn over your pool volume about once every 8–12 hours. Volume tells you if your flow rate is enough.

Heaters & covers

Heater BTU needs and evaporation loss estimates both start from how much water you are heating or protecting.

Fill & refill cost

Knowing gallons helps you estimate fill time and water-bill impact after draining for repairs or Miami storm prep.

Good to know

Pool volume FAQ

Straight answers about accuracy, irregular shapes, and how Miami pool owners use this number.

Still have a question? Get in touch

For standard shapes with careful measurements, expect a practical estimate within about 5–10%. Freeform and heavily contoured pools are estimates by design. For precise chemical work on a complex pool, we can verify volume on site.

A clearer next step

Ready to build or renovate your pool?

Our team designs and builds pools of every shape and size across Miami-Dade County—and we can take the guesswork out of water care too.